Measy U2C - Official Firmware - 1st. March 2013 Firmware Build: V411_130227 Changelog: Improve CPU frequency, Antutu score can reach 9200+ How To flash: Please download the relevant Firmware and Flash Tools I´ve uploaded. Next you need your U2C and the micro USB - standard USB cable that came with the device. You also need a small metal Stick, a Paperclip or sim removal Tool. You need to locate the small push button Switch The Idea here is that you need to use the metal Stick to press the Push Button switch and whilst holding it in connect the Micro USB cable to the Computer. This can be tricky to do as we only have one pair of hands! but with a bit of practice it becomes easy. The micro switch should “click” noticeably when depressed. When you have successfully connected your U2C to the Computer you should hear a Sound from Windows telling you that a new Device has been found. You can release the micro switch now. Install the Drivers... Unzip the Tool and open the Program RKBatchTool1.5en. Unzip the U2C_EN_V411_130227.zip, theres a Firmware *.img File in it. At the top right of the RKBatchTool Window you will see a file Selector, click on this and select your Firmware. (The update.img) If your U2C is correctly connected to the PC, the RKBatchTool Program will show a green square with “1″ on it. If not then you need to go back and make sure the USB driver is installed correctly. Click on “Upgrade” to install the Firmware. The RKBatchTool will give an Indication of what its doing with a progress Percentage shown below, when its finished you will get a message like *****upgrade done success***** That´s it, have fun with this new ROM ! Download Drivers here: http://vondroid.com/threads/rockchip-usb-driver-for-windows-2000-xp-vista-7-8.6151/ Download RKBatchTool here: http://vondroid.com/threads/rockchip-batch-tool-version-1-5.7420/ I´m not Responsable for any Problems caused... I only provide the Firmware and How-To. Everything you do is on your own Risk !