Mk808 Dead, Can you help?

Discussion in 'MK808B' started by joaonn13, Feb 9, 2014.

Remove Advertisements
  1. joaonn13

    joaonn13 Member

    Posts:
    30
    Likes Received:
    0
    Trophy Points:
    0
    TV Stick:
    MK808B
    Hi,

    My mk808 doesn't start, stopped in the middle of the flash(my little daughter was playing and inadvertently disconnected the cable)

    I try to flash it with RKbatch tool, It appear like connected but in blue not in green(connected devices 4-7), restore doesn't work, "prepare idb fail"

    I try open MK808 and test this operation:

    "Look between the heatsink and the board and you can see all the pins of the NAND chip. Again pin 1 is at the top. Count down to pins 8 & 9.
    With a needle or a pin put the pin between pins 8 and 9 and hold it there. You are trying to short these 2 pins so make sure your actually on them."

    Any Solution?? the nand have any protection to write after having stopped in the middle of the flash!!!

    Many Thanks.

    Joaonn13
     
  2. aswininipunnawnjana31233

    aswininipunnawnjana31233 Member

    Posts:
    4
    Likes Received:
    1
    Trophy Points:
    0
    TV Stick:
    Mk808b d808
Remove Advertisements