Hello! I upgraded my mk808 with a firmware called "mk808_1416mhz_1080p" which caused it to not start anymore. The led would light for 2 seconds then nothing... Then I couldn't do anything with it connected to the computer, everything just failed. Found a stock firmware that I actually was able to flash with but still it wouldn't work when connecting to the power connection but with the cable in the OTG instead everything is working fine except wifi.... I can't even enable it... Any suggestions what to try? EDIT: the firmware I got it to work with is mk808_300j1_27-10-2012, kernel: 3.0.8+ if that means anything Thanks in advance!