1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

N90FHD Quadcore A31 firmware

Discussion in 'Vido® (YuanDao)' started by Zniwiarz, Mar 13, 2013.

  1. Zniwiarz

    Zniwiarz Member

    Joined:
    Mar 13, 2013
    Posts:
    2
    Likes Received:
    0
    Location:
    Świdnica
    Tablet:
    N90 FHD Quad
    Help me! I need firmware for N90FHD Quadcore... i flashed Onda firmware and my touchscreen dosen't works.

    Please, help me or write what i have to do to works on other rom :/
  2. Piers

    Piers Staff Member Administrator

    Joined:
    Jul 16, 2012
    Posts:
    1,720
    Likes Received:
    402
    Location:
    London
    Tablet:
    See Signature
    Phone:
    Y300 CM11
    TV Stick:
    None
    Do you have a ROM for the N90FHD? From what I know that's a generic Retina tablet which should work with firmware from most other Retina. A good place to start or ask is on this thread.
  3. deedlit

    deedlit Member

    Joined:
    Apr 4, 2013
    Posts:
    1
    Likes Received:
    0
    Tablet:
    n90fhd quad
    I'm stuck with the same problem..
    The problem it's an allwinner a31 cpu - so the ones you provided (for the rk30 chip) won't work.
    I tried every other rom for the a31 devices (chuwi, onda, nextway, ainol, Teclast, freelander) and none worked...

    There is also no download on the original site (http://www.yuandaocn.com/download.aspx?key=n90) only for the dual core version...
  4. Franz Walter Kirchner

    Franz Walter Kirchner Member

    Joined:
    Jul 22, 2013
    Posts:
    2
    Likes Received:
    0
    Tablet:
    Yuandao/Vido n90 quad core fhd
    Phone:
    iphone 4
    Hello, I did the same but there is a solution:
    press and hold the home button while plugging in the mirco-usb to pc cable,
    then press the on/off button rapidly ten times and the tablet should connect
    (I used the phoenix suite software)
    Just yesterday i flashed the tablet with the newest ployer momo hd 19 firmware (V2)
    and the tablet works like a charm!!

    Walter
  5. TvS

    TvS Member

    Joined:
    Oct 9, 2012
    Posts:
    9
    Likes Received:
    0
    Tablet:
    yuandao n101 2
    Phone:
    ainol novo 7 fire
    I can confirm the Momo19HD FW mentioned by Walter is working on the N90FHD A31 device. Just flashed it via Phoenix Suite (1.0.6). Didn't have to do strange stuff like pressing on/off 10 times. Just installed Phoenix Suite, activated USB debugging mode on the tablet and it was immediately recognized. Everything works fine so far.