Guide How to DUMP Firmware using SP_Flash_Tool Sticky

Discussion in 'Firmware, Roms & Recovery' started by Tuen, Jun 26, 2013.

Remove Advertisements
  1. Tuen

    Tuen Staff Member Administrator

    Posts:
    4,813
    Likes Received:
    511
    Trophy Points:
    67
    Location:
    Sint-Niklaas - Belgium
    Tablet:
    See Signature
    Phone:
    See Signature
    SPFT Settings
    Open Smart Phone Flash Tool and select the tab Read Back
    Choose add (1)
    and double-click the new added row (2)
    Screen Shot 2013-06-27 at 00.04.02.png

    Give the file a name (see below for the names and value)

    Screen Shot 2013-06-27 at 00.04.33.png
    Give the start address (4) see below table for exact value
    and give the length (5) see below table for exact value.
    It's depends with type you want to type in. If you choose Decimal it will be easier to type and after you have typed in, you can choose HEX back to check on the table if you value is correct
    Screen Shot 2013-06-27 at 00.04.42.png

    Do this for every file that you want to dump from your phone.
    After all done, you choose read back. and follow the following steps to put them in flash mode

    Put Phone into Flash modus
    1) Fully shutdown the phone
    2) Put the battery out from the phone
    3) Put the usb cable into the phone
    4) put the battery into the phone and wait
    4a) The first time, you will need install the drivers (see files above)

    Wait until you see on your screen the following icon (OK Screen)

    Table with values
    Screen Shot 2013-06-27 at 20.16.46.png


    Note:
    I've Dump System.img (android) around 512MB and it takes me about 40 minutes to fully read them.

    If there are some mistakes in the "table with values", let me know

    Try this at your own risk, I'm not responsible for any bricks!!
     
  2. Tuen

    Tuen Staff Member Administrator

    Posts:
    4,813
    Likes Received:
    511
    Trophy Points:
    67
    Location:
    Sint-Niklaas - Belgium
    Tablet:
    See Signature
    Phone:
    See Signature
    updated table values
     
Remove Advertisements